A. Preparation
A1. Spread the tent according to its shape, smooth out the folds, and avoid sticking the tarpaulin.
A2. Cover all windows and unzip the curtains.
B. Inflating
B1. Connect the air pump and start inflation. Then adjust the tarpaulin position.
B2. When inflated to 70%, press the corners on both sides of the door to prevent the tent from inflating outward.
B3. When inflated to 80%, lift up the air tube to make the tent upright. Then pull both sides of the door towards the middle, and zip up the curtain.
You can also tie the rope on both sides and pull it towards the middle at the same time.
B4. When inflated to 90%, enter the tent, lift up the air tube, and adjust to the corresponding position.
B5. When inflated to 95%, turn off the air pump and stop inflation. Connect the intelligent air pump, set the parameters, start inflation from 0.3 PSI, and stop at 0.42 PSI. The tent can be used normally.
C. Other matters
C1. The inflatable tent can be fixed on the ground by the D-ring.
C2. The windows support light transmission and ventilation, roll up the windows and fix them on the Velcro on both sides, or remove the clear PVC. |
