1. Open the valve cap cover.

2. Insert the pump's nozzle into the hole or valve opening,

the pump should make a tight seal with the material

around the valve.

3. If using an automatic pump, turn it on, if using a manual

pump, start pumping.

4. Once the goods is filled to the point that it is fully inflated

and firm to the touch, remove the pump, then screw the valve

cap back to trap the air inside.

DEFLATING:

1. Unscrew the valve cap, press the air-release switch to let

air escape. As air drains from the goods, it will eventually

settle into a mostly - deflated state.

2. To get all of the air out, if you have air-release pump, use

the mechanism on the valve to let air escape. This will ensure

that the goods take up a minimum of space when it's completely deflated.

3. Wrap and pack the goods, keep store in a cool dry ventilated place.

WARNINGS:

1. Do not over inflate.

2. Do not remove the valve cap.

3. Keep away from sharp objects.